CO2 Laser Power Supplies for 50-180W Laser Tubes

With 20 years of experience in the laser industry, HM Laser is capable of providing CO2 laser tube power supplies that can significantly improve the effectiveness of laser tubes while helping to extend their service life.

Laser Power Supply
  • FDA Certificate
  • CE Certificate

FDA Certificate
CE Certificate

Inquiry
Safe

Our laser tube power supply features an open circuit protection function. When the high voltage terminal is under open circuit condition or not firmly connected, the power supply will activate automatic protection function to efficiently avoid high voltage leakage. High-voltage discharge function ensures no static electricity generated when powering off.

Intelligent

The built-in control is used to communicate with motion controller (typically RUIDA motion control card) that allows up to 32 power supplies to be controlled through cascade connection. The working status of power supply is shown on the display of control panel, enabling operator to easily monitor the machine and determine the fault.

Compatible

By using active PFC circuit (power factor correction), our laser power supply can achieve high power factor. Any input voltage ranging within AC90-264V 50/60Hz can be accommodated with relative ease, thereby limiting the impact on the output current when mains voltage is largely changed.

Simple

The laser output power can be controlled by 0-5V analog signal or 5V PWM signal.

Stable

With an improved current control, the laser is generated with high stability and compatibility due to that the constant current is guaranteed over the entire input voltage range.

Features
  • Wide input voltage range, universal for voltages of all countries
  • Open circuit protection
  • Stable output current
  • Support fault display

Discover Our Models of CO2 Laser Tube Power Supplies

P2 CO2 Laser Tube Power Supply

P2 CO2 Laser Tube Power Supply
  1. Input voltage: AC90-250V
  2. AC frequency: 47-63Hz
  3. Max. input power: 600W
  4. Max. input current (when 90V input): 5.5A
  5. Max. output voltage: 40kV
  6. Max. output current: 28mA
  7. Efficiency: ≥90% (full load)
  8. Mean time between failures (MTBF): ≥10,000 hours
  9. Response speed: ≤1ms (starting from the switching signal being sent to the output current reaching 90% of set current)
  10. Withstand voltage: input-output, input-shell: AC1500V 10mA 60
  11. Operating environment: temperature -10℃to 40℃, relative humidity ≤90%
  12. Cooling: force-air cooling (FAC)
  13. Applicable laser tube power: 50-80W
  14. Dimension (L×W×H): 235×144×104mm
  15. Weight: 2.15kg
  16. Shell color: silver gray
  17. Warranty: 18 months

P4 CO2 Laser Tube Power Supply

P4 CO2 Laser Tube Power Supply
  1. Input voltage: AC90-250V
  2. AC frequency: 47-63Hz
  3. Max. input power: 650W
  4. Max. input current (when 90V input): 6A
  5. Max. output voltage: 45kV
  6. Max. output current: 32mA
  7. Efficiency: ≥90% (full load)
  8. Mean time between failures (MTBF): ≥10,000 hours
  9. Response speed: ≤1ms (starting from the switching signal being sent to the output current reaching 90% of set current)
  10. Withstand voltage: input-output, input-shell: AC1500V 10mA 60
  11. Operating environment: temperature -10℃to 40℃, relative humidity ≤90%
  12. Cooling: force-air cooling (FAC)
  13. Applicable laser tube power: 80-120W
  14. Dimension (L×W×H): 278×144×104mm
  15. Weight: 2.45kg
  16. Shell color: silver gray
  17. Warranty: 18 months

P6 CO2 Laser Tube Power Supply

P6 CO2 Laser Tube Power Supply
  1. Input voltage: AC90-250V
  2. AC frequency: 47-63Hz
  3. Max. input power: 900W
  4. Max. input current (when 90V input): 8A
  5. Max. output voltage: 55kV
  6. Max. output current: 38mA
  7. Efficiency: ≥90% (full load)
  8. Mean time between failures (MTBF): ≥10,000 hours
  9. Response speed: ≤1ms (starting from the switching signal being sent to the output current reaching 90% of set current)
  10. Withstand voltage: input-output, input-shell: AC1500V 10mA 60
  11. Operating environment: temperature -10℃to 40℃, relative humidity ≤90%
  12. Cooling: force-air cooling (FAC)
  13. Applicable laser tube power: 130-180W
  14. Dimension (L×W×H): 330×144×104mm
  15. Weight: 3.2kg
  16. Shell color: silver gray
  17. Warranty: 18 months

Packaging

Double-layer foam packaging prevents damages caused by shock, pressure or collision during transportation.

  • Packaging
  • Packaging
  • Packaging
  • Packaging
CO2 Laser Tube AssemblyCO2 Laser Tube Assembly
Laser Tube InstallationLaser Tube Installation
Package TestingPackage Testing
WorkshopWorkshop

Get In Touch

HM Laser was founded in BDA Beijing 2002. We started as EPILOG sole agent, introduced the 1st CO2 laser cutting engraving machine into China, opened a new world to China non-metal laser application such as sign makers, craft gift makers, clothing, shoes making, leather processing; we grow up with IPG fiber laser from 2005, improved the metal works factory production efficiency. Till now we have been following the laser market demand, develop laser products, serviced thousands laser users all over the world.

Other Products

CO2 Laser Tube, H Series

CO2 Laser Tube, H Series

US II-VI laser mirror and German Schott glass tube (discharge tube), with good configurations of resonant cavity;
CO2 Laser Tube, M Series

CO2 Laser Tube, M Series

US II-VI laser mirror and German Schott glass tube (discharge tube), with good configurations of resonant cavity;
Focusing Lens

Focusing Lens

Focusing lenses are extensively used in CO2 laser processing applications, such as laser cutting, engraving, marking and drilling systems.
Total Reflector

Total Reflector

Laser reflector mirror is a critical component in the laser transmission system, it works together with focus lens to form a complete optical path in the CO2 laser system.